KREISEL Products

Products Similar Products
Conveying line diverter

Conveying line diverter

If using a pneumatic conveying system either two or more receiving points, such as silos or reactors are feeded, the Conveying line diverter can be used. In addition to the compact design, the crossover is characterized by its low pressure drop. The diverter is designed so that the mainflow direction of the inlet and the outlet is in the same axis. The seal is realized by a valve disk. The structural design ensures that caking cannot lead to blocking of the diverter. Product-highlights - operated elektronical, pneumatically and manually - ATEX certificated - wear protected casting construction
 
Read more
Double pendelum gate

Double pendelum gate

Double flap gates are used to seal vacuum chambers with simultaneous discharging of dust-based and flowing material. KREISEL double flap gates are particularly suitable for discharging of highly abrasive bulk materials at the basic industry as well as the chemical industry: minerals, nature stone, ash, cement, ceramics and coal. The operating principle of the flap gate valve is that two flap gates in a fixed housing open and close alternately. The mechanical system is driven by a gear motor. By means of the gear unit, the reciprocal opening and closing is controlled. In each case, a flap seals the system against false air inflow at diverse pressure ratios, even as the other opened flap is channelled the materials. Drive trains have been realizing motorized, hydraulically, counter weighted or pneumatically. Product-highlights - product loading free of leakage air - minimal wear behavior - easy maintenance - long service life
 
Read more
Slide Gate

Slide Gate

Slide gates are used as locking, metering and safety components below dosing and in process engineering systems of the bulk material technology. Our slide gate series(engineered at Kreisel) is made for extreme and complicated operating conditions. The specific design of the KREISEL slide gates is based on the system-specific operating conditions and bulk material properties. KREISEL slide gates are designed as knife gate valves with rectangular or rounded cross section. KREISEL produces a wear-resistant construction from profile steel frame, sliding plate with bearing, sealing system and drive unit. The profile steel frame is designed as flange on the inlet and outlet side. According to the requirements, the sliding plate can be moved by means of actuating drive, pneumatic or hydraulic cylinder, gear motor or hand wheel. Product-highlights - wear-resistant construction - special sizes feasible - pressure shock resistant construction
 
Read more
Dome Valve

Dome Valve

The KREISEL DOM VALVE® is an shut-off valve. It is used at high differential pressures up to 16 bar. The benefits arise from the cross-section being available to 100% in the opening condition. It is useable at the pneumatic conveying asa conveying line diverter. In this case there will fitted a Y-pipe with two KREISEL DOMVALVES®. Even so they have been seals against high differential pressures. The field of main application is the pressure vessel conveying. In this case the KREISEL dom valve work as an running-in and/or running-out valve. The 100% opened cross section protects of bridging and wear because of disruptive elements in the material stream.
 
Read more
Ceramic Rotary Valves

Ceramic Rotary Valves

Highly wear-resistant lining with ceramic elements reduces the ware to conventional rotary feeders by a multiple. Ceramic places with a Mohs hardness of 8.5-9.0 (Diamond has the highest hardness of Mohs 10) the optimum wear protection. Further advantages are the lateral inspection openings. By the inspection openings the wear condition between rotor side disks and housing can be checked in built-in state of rotary feeder.
 
Read more
KREISEL dosing system

KREISEL dosing system

The KREISEL dosing system was designed for metering fuels such as pulverised coal, lignite or petcoke into burners. The KREISEL DosFeed dosing system was designed to comply with the high requirements on metered and low-pulsation conveying. The main focus during development involved a simple constructive design, long service life and high metering accuracy.
 
Read more
Pneumatic conveyance of pulverized coal

Pneumatic conveyance of pulverized coal

KREISEL Engineering has developed a modular system for the design of customized pulverized coal conveying plants. This system allows a general certification on the system- safety and integration into the customer facilities. By a notified body the systems and their interfaces were investigated and rated. The illustrated KREISEL components were approved as single units and as an assembly group for use in hazardous explosion areas and released by an EC Type Examination from the notified body.
 
Read more
Pneumatic Conveying System

Pneumatic Conveying System

KREISEL pneumatic conveying systems are best adepted for conveying every kinds of bulk materials. Conveyor distances over 1,000 meter and conveying rates more than 100 t/h can be realized. Every conveying system will be customised for the special kinds of customer requirements and with an optimum energetic efficiency level. As loading or feed-in components are usable: rotary valve, pressure vessel, jet conveyor or screw conveyor comes from the KREISEL manufacturing. The deposit at the point of reception will be realised by KREISEL filtration systems.
 
Read more

Contact
Information

898/7 6th floor Sahaviriya City Building 2
Rama 3 Rd, Chongnonsee, Yannawa
Bangkok 10120 Thailand
(662) 682-5468 - 70
(662) 682-5473
General Information: dapco@dapco.co.th

 

Call center

+662 682 5468 - 70

Mondays – Fridays from 08:30 am. to 05:00 pm


Copyrighted 2016. D. A. P. Co., Ltd. All Rights Reserved.