A TEC Rocket Mill RM 2.50 double starts operation in Austria

เผยแพร่ 16 ตุลาคม 2560 เวลา 21:39:20
1,134 เข้าชม
360 ดาวน์โหลด

After seven months of engineering, construction works and installation works A TEC’s Rocket Mill was commissioned on 07.11.2016 in Wiener Neustadt.

Highly caloric residue-derived fuels

To optimize the production of highly caloric residue-derived fuels for the cement industry the Austrian company .A.S.A. installed A TEC’s Rocket Mill® RM 2.50 double in their treatment plant in Wiener Neustadt.

Pre-sorted and shredded household and commercial waste with a bulk density ranging from 100-300 kg/m³ can be ground down to a size of 15mm with 50 per cent smaller than 5mm in only one step (depending on the size of the sieves). The material has excellent ignition properties due to a change of physical properties (higher specific surface). Subsequently it is used by cement manufacturers from the region. Mainly produced by A TEC Plant Construction in Eberstein the mill has a capacity of 7-40 t/h and can be used for different output sizes. The mill is equipped with two grinding chambers which can be independently loaded. Each one has a main drive with 315 kW. Due to the grinding technology an additional drying effect of approx. 10 % is given.

The mill convinces not only with its excellent output material, it’s also easy to maintain (no knives) and insusceptible against extraneous material and heavy items. 

Please see below video of A TEC Rocket Mill and Company presentation:

 

A TEC Rocket Mill

https://www.dropbox.com/s/0ej5sm8dzy158o0/videoplayback%20%281%29.mp4?dl=0

Company Presentation

https://www.dropbox.com/s/hnqc9dceen5c06v/A%20TEC%20Presentation_Generell.pdf?dl=0

 

แชร์...

รายละเอียด
สำหรับติดต่อ

898/7 ชั้น 6 อาคารสหวิริยาซิตี้ 2
ถ.พระราม 3 แขวงช่องนนทรี เขตยานนาวา
กรุงเทพฯ 10120
(662) 682-5468 - 70
(662) 682-5473
ฝ่ายประชาสัมพันธ์: dapco@dapco.co.th

 

Call center

+662 682 5468 - 70

จันทร์ - ศุกร์ เวลา 08:30 - 17:00


Copyrighted 2016. D. A. P. Co., Ltd. All Rights Reserved.