A TEC Rocket Mill RM 2.50 double starts operation in Austria

Posted on 16 October 2017 21:39:20
7,708 Viewer
2,971 Download

After seven months of engineering, construction works and installation works A TEC’s Rocket Mill was commissioned on 07.11.2016 in Wiener Neustadt. 

Highly caloric residue-derived fuels 

To optimize the production of highly caloric residue-derived fuels for the cement industry the Austrian company .A.S.A. installed A TEC’s Rocket Mill® RM 2.50 double in their treatment plant in Wiener Neustadt. 

Pre-sorted and shredded household and commercial waste with a bulk density ranging from 100-300 kg/m³ can be ground down to a size of 15mm with 50 per cent smaller than 5mm in only one step (depending on the size of the sieves). The material has excellent ignition properties due to a change of physical properties (higher specific surface). Subsequently it is used by cement manufacturers from the region. Mainly produced by A TEC Plant Construction in Eberstein the mill has a capacity of 7-40 t/h and can be used for different output sizes. The mill is equipped with two grinding chambers which can be independently loaded. Each one has a main drive with 315 kW. Due to the grinding technology an additional drying effect of approx. 10 % is given. 

The mill convinces not only with its excellent output material, it’s also easy to maintain (no knives) and insusceptible against extraneous material and heavy items

Please see below video of A TEC Rocket Mill and Company presentation:

A TEC Rocket Mill


Company Presentation



Share on...